Power Sprayer

Approx. Rs 4,500 / Unit Get Latest Price

Description:

Approx. Rs 3,200 / Unit Get Latest Price

Description:

Approx. Rs 12,500 / Unit Get Latest Price

Introduction:
These portable power sprayers are either gasoline or electric engine powered. They use piston displacement reciprocating double acting pump to achieve an operating pressure of up to 300-350 psi.

They are widely used in various farms and fields for spraying pesticides and insecticides on crops in order to keep them free from pests and insects. They can also be used for car wash or cleaning a road etc.

Approx. Rs 8,000 / Piece Get Latest Price

Description: ModelOS-380 Plunger No.DIA Stroke3x18x6mm Pressure0-60 kg/cm2 Suction Volume8-10 L/min Motor1.6 KW Speed2800 rpm Weight22.0 kg Dimensions(LxWxH)580x310x370mm

Approx. Rs 18,500 / Piece Get Latest Price

Car wash foam pressure tank machine available with us Very easy to operate No compressor required No electricity required 80L Stainless Steel Rust proof tank Mfg by high grade steel A full tank can wash 25-30 cars 10m hose pipe Spray gun Trolley included in accessories.

Approx. Rs 15,000 / Piece Get Latest Price

•  MOTOR Comes with 3 HP Electric Single Phase Motor with 2800 RPM
•  HTP PUMP Plunger x Dia: 3x30, Suction/Output: 30 l/Min, Pressure: 2.0-4.5 MPA
•  QUALITY MATERIAL Light weight and compact construction, Sturdy & Rugged Construction, Heavy Stainless Steel Piston
•  MULTIPLE USE Except for washing cars & bike its also suitable for watering flowers, cleaning window, washing floor, Showering your pet, cleaning air conditioners, large spraying operations in orchards like paddy, mango, coffee, apple, vineyards, ground crops and in particular for tall trees like coconut etc.
•  EQUIPPED WITH FULL WORKING ACCESSORIES (1) Sprayer Set With Motor (2) 15 Meter Hose Pipe (3) Suction Pipe (4) Over Flow Pipe (5) Spray Gun (6) Suction Filter

Approx. Rs 7,000 / Piece Get Latest Price

• Product Details

Foam barrel Accessories : inlet valve, pressure regulator , pressure gauge, plus valve , foam produced valves, quiet valves, hoses, drain valve , foam valve , funnel, 6 m hose ( can be extended ) .

Stainless Foam Machine divided into two kinds of materials : 202 material

Now we are all made of copper valves, plastic valves in addition to the outer drum .

Capacity : 80L

Use pump :1- 1.5 kilograms ( 1.5 )

Working pressure: less than or equal 0.01MPA

Tank Material: Stainless steel 201 / 304 and iron

Valve material : brass ball valve

Plate thickness: stainless steel 1.2MM, 1.5MM iron

Pipe size : 12 * 6 meters

Packing size : 45 * 39 * 80CM

Packing : 1PCS

Weight: 15 kg

 

Instructions: Open the inlet valve, adding deployment of good water liquid wax . Close the valve inlet valve and gun , and then use quick connectors connect compressed air. More work ready, connected to compressed air , etc. Working pressure up to 2Bar , open the gun valve to spray water wax , spray distance and spray methods can be used to regulate the pressure and gun .

Note: This product regulator is factory adjusted pressure 2Bar, if not necessary , do not arbitrarily transferred to air pressure. 2Bar use pressure , ejection best results.

Basic troubleshooting If you open the valve when the gun hit anhydrous wax reasons may be: no gas into the gas source ; aqueous liquid wax bottomed out ;

This equipment regularly checked for leakage , if any should immediately overhaul.

Always check the hose connections are tight , the device should always use a towel to wipe the surface clean, keep the equipment clean , used equipment as possible after discharge clear liquid bucket and placed in the shade to avoid the barrel rust corrosion affect the normal use .

Note: Before using the equipment , please read this instructions, training of qualified rear operational use . No smoking near the equipment .

   Please adjust the gun when using the distance , to avoid accidents wounding .

   Do not use poor quality water, liquid wax to maintain the equipment within the oil valve , rubber and other parts of life and the cleaning effect.

Bubble machine design, delicate bubbles , uniform, low efficiency , easy to move . By car wash beauty industry 's favor .

 

Instructions for use:

 

1 Open plus valve and exhaust valve, adding 70 liters of water , then add the washing liquid 1000 ml ( Note : If you are the first time, plus the best washing liquid 1200 ml )

(2) Close the valve and the exhaust valve plus , shut the gun valve switch, and then connect the compressed air with quick connector

3 The above work is ready, open air switch, until the pressure rises to 0.09Mpa , open the gun valve switch, you can spray foam

4 Fill 70 liters per 1000 ml of water and washing liquid , you can wash cars 30-30 cars , 25 liters per tank washing liquid can be washed 750 cars

Note: This product is a pressure vessel , pressure valve is factory adjusted pressure 0.09Mpa, please do not adjust air pressure valve , overpressure is strictly prohibited to use the product !

 

Name: Tank Foam machine

 Logistics Volume: 0.14 m2
Weight: about 15 kg
Package Size: 45 * 39 * 80
Thickness: Iron 1.5MM, 1.2MM stainless steel
Pipe size: 12 * 6MM
Tank capacity: 80L
Working pressure: 0.01MPA

Approx. Rs 10,000 / Piece Get Latest Price

Foam barrel Accessories : inlet valve, pressure regulator , pressure gauge, plus valve , foam produced valves, quiet valves, hoses, drain valve , foam valve , funnel, 6 m hose ( can be extended ) .

Stainless Foam Machine divided into two kinds of materials : 304 material

Now we are all made of copper valves, plastic valves in addition to the outer drum .

Capacity : 80L

Use pump :1- 1.5 kilograms ( 1.5 )

Working pressure: less than or equal 0.01MPA

Tank Material: Stainless steel 201 / 304 and iron

Valve material : brass ball valve

Plate thickness: stainless steel 1.2MM, 1.5MM iron

Pipe size : 12 * 6 meters

Packing size : 45 * 39 * 80CM

Packing : 1PCS

Weight: 15 kg

 

Approx. Rs 4,000 / Unit Get Latest Price

Description:

Approx. Rs 5,500 / Unit Get Latest Price

Description:

Approx. Rs 15,000 / Unit Get Latest Price

Features:

• Easy to operate and high safty
• Precise Machining Technique
• Long Life of the Machine
• Delicate and Beautiful Appearance Design
• Broader Applicable Scope
• Good quality and less malfunction