Maharashtra Traders

Easy model, the latest sport model that developed from SS200 and SS300, it's compact and easy to use.
Especially, long shaft is divided into 2 parts that the total set can pack in only 1 carton box.
It will save you a lot of transportation cost, easy to move and store.

1. Applicable ship type: four-stroke 4 horsepower outboard motor is suitable for all kinds of small boats (such as rubber boats, fishing boats, wooden boats) of 2.3 to 5 meters. 2. Driving situation: The built-in fuel tank can drive at high speed for about 2 hours at a time, and the driving speed is about 10~15km/h. The driving distance is different due to different conditions such as ship type and load current conditions. 3. Fuel use: Four-stroke fuel uses gasoline above 92#, and the oil is added to the inner oil tank separately. 4. Other instructions: This model has no gear setting, stepless throttle adjustment, and air cooling system. Plastic steel propeller.

MODELCG630BMATCHED ENGINE1E48FDISPLACEMENT(cc)63.3STANDARD POWER(kw)2FORM OF CARBURETORDIAPHRAGMMIXED FUEL RATIO25:1TANK CAPACITY(L)0.95DIAMETER OF ALUMINIUM(mm)28WORKING FORMSHOULDERWEIGHT(N.W./G.W.)(kg)8.7/10.5PACKING MEASUREMENT(mm)1860X320X330X110 Advantage:1.Long engine life, through paralel test with other suppliers''
2.Diameter of the aluminum pipe is 28mm. the thickness is 2mm
3.Optional choice of split pipe, be portable we you put in your car.
4.The stop switch is auto-reset on "ON" place and half lock throttle lever, be convenient.
5.Low noisy,be environmental.
6.Low vibration, be comfortable.
7.Easy start, less pulling when operation.

SPECIFICATIONS
Honda GX 160  Recoil Start only.
160 CC HONDA ENGINE
DRIVE: Triple-sealed long-life bearing system
SHAFT LENGTH: 65" or 55" SNEAK LITE
PROP: KKK Stainless Super weedless
Weight: 85 lbs.

4 stroke engine (honda type) in backpack
gx-35 model
backpack / knapsack
comes with 3t blade, round blade , tap & go and paddy guard
fuel efficient and heavy duty , works for 2 hours+ in 1 ltr plain petrol.
9in1 multi tool backpack brushcutter.
1. Nylon trimmer head
2. 3t fan metal blade
3. 80t saw blade
4. Paddy attachment
5. Weeder attachment
6.   tiller
7. Polesaw attachment
8. Water pump
9. 2t blade

ENGINE -173F DIESEL ENGINE DISPLACEMENT-247CC ,4 STROKE TRANSMISSION -GEAR DRIVE POWER-4 KW BLADES-32 PCS DRY LAND ATTACHMENTS-SIDE DISC ,ADJUSTIBLE RIDGER TYRE-4-0-8 START TYPE- RECOIL START

Also known as earth auger, handheld power earth drill, soil auger, or ‘mechanized post hole digger’ this tool is ideal for digging earth post holes. This unit is fitted in a pre build steel frame to allow for safer, more accurate and less strenuous use. Fitted with a powerful 68 cc  engine it will work on even the toughest of soil.

Machine Parameter
power 7hp
Weight 16kg
Cold Style Air-cooled
Stroke 4
Dimension 312*362*346mm
model 170F
Start Kick Start and key start
Dispalcement(ml) 212

POWER WEEDER – MY-600G
MODEL NO – MY-600G

SPECIFICATION
ENGINE MODEL – 170F ENGINE
DISPLACEMENT/FUEL – 212CC/PETROL
MAX POWER/RPM – 4KW/3600RPM
STARTING SYSTEM – RECOIL
TRANSMISSION – GEAR
HANDLE BAR SYSTEM – UP/DOWN LEFT/RIGHT
TYRE – 4. 0-8 (TUBELESS)
BLADES (DRY LAND) – 32 PCS
GEAR – R,0,1,2
TILLING DEPTH (MM) – 100-300MM
TILLING WIDTH (MM) – 1000MM
FUEL CONSUMPTION PER HOUR – 374G/KW. H

Gasoline Chain Saw is ideal for the most challenging jobs including cutting logs for the fire with ease! It has anti vibration system which makes the operation of this machine easy as well as efficient. It is ergonomically designed and possess a powerful motor to perform prominently. Minimal effort is required to operate as it has an inbuilt smart start feature. Gasoline Chain Saw is quite durable as well as easy to use and highly reliable. With 550 ml fuel tank capacity and 260 ml oil tank capacity these chain saws are reliable and have a quality finishing. This chain saw has an automatic & adjustable gear driven oil pump, for better chain & bar lubrication. Efficient for heavy duty tasks, this chain saw has a high power/weight ratio and works in any position. Rest assured of high performance and overload protection along with a greater control, versatility and increased depth accuracy.

• With All Attachment ,Excellent balance, low weight
• Long life filter system with self cleaning and compensator effect-considerable extends intervals between cleanings
• Four point anti vibration system for greater operator comfort & safety
• Full harness for less fatigue and greater safety (special accessory)
• With Heavy Duty stroke engine 2 Stoke

• Less expensive and more user-friendly than any water pump on the market!
• --No suction hose or priming required!-- Pumps up to 30 gallons per minute! = 1800gph.
• Turn your handheld string trimmer into a TORNADO with this Powerful Pump
• Trench with broken water lines, Flooded basements, water Meters, Yards, Boats, Fish Ponds & Fountains, Valve Boxes, Cemeteries, Mosquito abatement, Cattle Tanks
• Anywhere water needs to be removed! (Even muddy water)

India's largest sellers of Fogging Machines since 1999.

Covers small area effectively,weight just 1.5 kg

Use LPG Gas and diesel as burner fuel , Noiseless operation.

 All spare parts and service available.

Patented Fused Tank and Water based Coil Cleaning System

Avail from us a large variety of domestic and commercial purpose Hose Pipes. These flexible pipes are manufactured using premium quality raw material to ensure long service life without any snapping or leakages. These Hose Pipes are designed to withstand rough usage. 

Descriptions :
Seedling transplanter is used to transplant seedlings from a seedling tray into dry/semi-dry soil
It also helps farmers to avoid hand and back injuries that happens during planting
It also helps to maintain distance between each seedling
Create the dig hole, fill up the hole, break the mulching film, in same time plant the seedling , just poke, squeeze and pull, by this you can finish the whole procedures of seedling transplanter

Specifications :
Product Type : Seedling transplanter in mulching
Brand : Made In India
Material : Stainless Steel
Diameter : 2.5 inch
Weight : 2 kg (Approx

Introduction and Application
This tool is suitable for the cultivated soil, especially the sandy soil and suitable for seeds
like wheat, corn, peanut, beans, cotton etc. It can be used for sowing . A person can sow 8000-1000 m2 seeds with a seeder per day.
The efficiency is 4-5 times more than manual seeding. Sowing seeds with our machine
according to season and time will decrease the sowing time and enhance the output
especially, the hilly areas where big machines cannot be used.
Note: KK-MSD-S01 has single barrel and is used for sowing seeds.
Features
1. We can seed 1-3 seeds by adjusting the planting plastic board and depending on
your requirement, select the exact position and put into the plastic board. Now you
will get the exact seeder number for your planting purpose. 
2. It is easy to remove the seed drum for troubleshooting and cleaning purposes.  
How to Use
1. Put the seeds into the seeder box .
2. Using your hand, insert the sowing mouth in the soil and then lift the seeder until the mouths leave the soil.
NOTE: Insert the mouths deep into the soil. It should not be lifted up neither quickly nor too slowly. Care must be taken while lifting up i.e., taking the machine out of the soil so that the seeds are evenly placed in the soil.

Available Sizes 1, 1½, 2, 3,4 Feet & OtherInput Thread ½' Inch (Outside)14 x 1.5 mm (Inside)We offer custome size sparay gun as per client

A 7.5 horsepower, 4-stroke, 212cc key start petrol engine is a powerful and versatile engine that can be used in a variety of applications, including powering lawn mowers, generators, pressure washers, and go-karts. These engines are known for their reliability, durability, and ease of use.
Here are some of the key features of a 7.5 horsepower, 4-stroke, 212cc key start petrol engine:
* Horsepower: 7.5 horsepower provides ample power for a variety of applications.
* Engine type: 4-stroke engines are more fuel-efficient and quieter than 2-stroke engines.
* Displacement: 212cc refers to the engine's cylinder size.
* Start method: Key start provides a convenient and easy way to start the engine.
* Fuel type: Petrol engines run on gasoline.
If you are looking for a powerful and reliable engine for your next project, a 7.5 horsepower, 4-stroke, 212cc key start petrol engine is a great option.

REAPER ATTCHMENT Row:3Cutting Width (mm): 1000Stubble Height (mm): >50Laying angle (0): 90+20 Supporting Power range (kw):4-8.5Drive Wheel Tire Specifications: 4.0-8Suitable Model: 7HP Gasoline/5 HP Diesel

Description

The torque generated by engine or electric motor is transferred to reciprocating motion by crank gear, which will pass it on vibrating foot through spring cylinder. It has strong impact force though it is small and light.

Feature

Advanced design gearbox cover
Add one more bearing seat in the gearbox cover to fix the small gear, which run the machine more steady and dependable.

Double air filter
PME-RM85 with double air filters. It can clean the air entering engine more efficiently, to reduce engine damage taken from great dust when compaction.

Outstanding self-balance
Outstanding self-balance of the machine providing high efficiency while reducing operator fatigue.

PRODUCT NAME - SINGLE RICE MILL                                                                              MODEL-6N40-E                                                                              MOTOR POWER(KW) - 1.8                                                                                                                                         PRODUCTIVITY(KH/HR) - 120-150

Product Description                       

Features                                      

1) Diameter: .050' - .158' / 1.30mm – 4.00mm
2) Shapes: round, square, trigon, star, hexagon, square twist, ellipse twist, duo power, saw tooth
3) Quality grade: economical, commercial, professional
4) Package: card head,loop donut, 1/2lb donut, 1lb donut, 3lb spool, 5lb spool, 10lb spool,20lb spool
5) Suitable for most leading trimmers and brushcutters

Gasoline brush cutter parts working shaft complete  Hanging shaftbacksacked shaftlength1.5m1.33mDia26/28mm26/28mm

Honda’s GX series engines are legendary for superior reliability and performance. And there’s no doubt about it: the GX200 lives up to the legend. Lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance.

- Honda OHV commercial grade engine
- 5.2 kW (6.9 HP)/4.500rpm and 196 cm³ Displacement
- Fuel efficiency

pecifications

SKU : 9-02-170001

Product category: Reduction Engine 

Short description: RD Set is a direct long shaft designed for reduction engine with gear box inside. The set is suitable for heavy duty.

Product sub-category: For reduction engine 5.5-6.5 HP (Honda GX200 L-Type) Complete set: Engine Base G200,

         Base Seize G200 (Nut / Butterfly Screw),

         Engine Housing RD200,

         PTO Shaft S200 20.00 mm.,

         Pole Stick Rd200, Handle (2 holes / short),

         Long Shaft A90 inch,

         Propeller 9 inch

Example of Engines with RD200 Set

 Honda – GX200 L-Type

 Remark: Any engines with same specifications to Honda GX200 L-Type (reduction) are compatible with RD200 Set