Outboard Motor

Approx. 78,000 / Piece Get Latest Price

Product Brochure
Honda GX390 MEGA MARINE LBHB Gasoline Marine Engine 16.0 HP FEATURES: This engine is for Marine use only. Fuel Efficiency ??? Honda GX-Mega Marine engines have OHV combustion that gives high torque and power while minimizing the consumption of gasoline. Powerful and Reliable ??? GX engine performance is tried and tested (Digital CD and high engine rpm). Easy to Assemble ??? Aside from the fact that it is lightweight, Honda GX-Mega Marine is very easy to assemble because of its compact design. Easy to Start ???Due to its Digital CDIand light pull recoil, starting the engine would be a very easy job. Engine Stop Switch Stainless Muffler Digital CDI with Limiter SPECIFICATIONS: Model GX390T2 (LBHB) Type 4 Stroke, OHV, Single cylinder, inclined 25?? Displacement 389 cm?? (23.7 cu-in) Bore x stroke 88.0 x 64.0 mm (3.5 x 2.5 in) Net power (SAE J1349) * 1 9.8 kW (13.1 HP) @ 4000 rpm Maximum net torque (SAE J1349) 26.9 N-m (2.74 kgf-m, 19.8 lbf-ft) @ 3000 rpm Compression Ratio 8.2 : 1 Fuel consumption (at continuos rated power) *1 4.7 Liters (1.24 US gal, 1.03 lmp gal)/h Ignition system Transistorized magneto Lubrication system Forced splash Oil capacity 1.1 Liter (1.16 US qt, 0.97 lmp qt) Starting system Recoil starter Air cleaner Grid type Governor Mechanical centrifugal Fuel used Gasoline with a pump octane rating of 86 or higher Fuel tank capacity 6.1 Liters (1.61 US gal, 1.34 lmp gal) INCLUSIONS: 1 x Honda GX390 MEGA MARINE LBHB Gasoline Marine Engine 16.0 HP 1 x Stainless Exhaust Pipe 1 x Spark Plug Wrench 1 x User Manual RD390 Product category :??Reduction engine Product sub-category :??For reduction engine 13-16 HP (Honda GX390 L-Type) Complete set :??engine base, base seize, engine housing, PTO shaft 25.00 mm. (connector 10 points), pole stick, handle, long shaft RD110 inch and propeller 12 inch. Short description :??RD set is a direct long shaft that designed for reduction engine which has gear box in the engine. They are suitable for heavy duty. Moreover, we provide a connector 10 points (PTO shaft) for more durable and high performance. (please see video clip in gallery) They consist of -????????????????????Engine base ????? Standard engine base strong, durable to carry a heavy engine -????????????????????Base seize ????? Standard base seize durable to hold with any surface on the boat -????????????????????Engine housing ??? Short standard engine housing that can carry with any power of engine. -????????????????????PTO shaft ??? Short standard PTO shaft 25.00mm (connector 10 points). can deal with any high power of engine. -????????????????????Handle ??? A standard handle 1 metre simple, comfortable and easy to control. -????????????????????Long shaft ??? Long shaft RD110 inch, can support propeller up to 12-13 inch. -????????????????????Propeller ??? Aluminum propeller 12???, bigger propeller give them more power to do heavy duty. -????????????????????Pole stick ??? Due to high power of reduction engine, they need to support housing, prevent it break down.

Approx. 41,000 / Unit Get Latest Price

Enjoy the power of Honda longtail shaft on your boat. The Lontail tail boat machine is easy to start, it gives off minimal odour, smoke and noise and its 4 stroke engine ensures no mixing of oil with fuel.

Approx. 70,400 / Piece Get Latest Price

PARSUN TWO STROKE 3.6HP OUTBOARD ENGINES FEATURES:

1.High grade marine aluminum alloy for ultimate corrosion protection

2. Tilt & trim with shallow water drive various positions

3. Twist grip throttle control for easy maneuverability & safety

4. Thermostat controlled water cooling system

5. Safety lanyard with emergency shut off

6. Easy forward-neutral gear shifting

7. Vibration reduction system for smooth performance

8. Adjustable steering friction for easier maneuverability

9. Innovative large recoil wheel assists easy starting

10. Carrying handle for moving easily

 
These portable 3.6hp outboard engines may be small in size, but they are big on advanced design ideas, innovative features and big engine performance. These outboards are available in a range of horsepower to fit a variety of applications. Our portables are designed with your convenience in mind, featuring carrying handles and resting pads for easy transport and horizontal storage.

The main different specifications between T2.5/3.6 and T2/2.6:
1.T2.5/3.6 outboard engines displacement is 74.6cc, T2/2.6 is 50cc.
2.T2.5/3.6 gear shift with FORWARD and NEUTRAL position.

PARSUN 3.6HP OUTBOARD ENGINES SPECIFICATIONS

*Propeller choice will vary by boat size and application.
*B=Back control(Tiller control), M=Manual start, X=Ultral long shaft, L=Long shaft 

Approx. 30,000 / Piece Get Latest Price

Product Brochure

The 2.6hp Parsun 4 stroke Outboard Motor is perfect for a dinghy, tender, canoe or sailboat. Economical, compact and portable, providing you the most power in a small parcel. The lightweight Parsun 2.6hp outboard has a great horsepower to weight ratio and other features.

Features
Compact and lightweight
Innovative TCI ignition system for easy starting
Twist grip throttle control for easy maneuverability and safety
Thermostat controlled water cooling system for consistent engine temperature
Safety Lanyard/Emergency Shutoff
Heavy duty aluminum propeller
360 degree with Forward-Neutral shifting
Convenient, easy to monitor oil level gauge indicator
Convenient 1.3L integral fuel tank
Heavy duty marine aluminum alloy for ultimate corrosion protection
Vibration reduction system
Start in gear protection
Shallow water drive
Ultra low emmission

SPECIFICATIONS

Weight 17 kg
Condition
new

Brand
Parsun

Engine-type
4 Stroke

Displacement
72cc

Bore-stroke
54.0×31.5mm / 2.13×1.24in

Max Output
2.6hp / 1.9kW

Full Throttle RPM Range
5250 – 5750 rpm

Ignition-system
TCI

Control-system
Tiller

Starting-system
Manual Start

Gear-positions
Forward / Neutral

Gear-ratio
2.25 (27/12)

Trim-tilt-system
Manual, 4 positions/Shallow drive

Fuel-consumption
1.1 L/h

Fuel-tank-capacity
1.2L

Sump Oil Capacity
0.35L

Gear-oil-capacity
75cc

Shaft
15" Short, 20" Long

Alternator-output
None

Propeller Options
3-7.37 x 5.37"

Overall Width
343mm / 13.5in

Approx. 13,500 / Unit Get Latest Price

Features:

Suitable for 2.5-3.7m boat, infaltable boat or kayak

Fresh water fishing use

Economy and efficient outboard motor

Anti-vibration system

Tiltable bracket

 

Air cooled

Hi, Low Speed, 360 rotatory

2.0HP 2 stroke engine

Specification:

Engine type: 2 stroke air cooled

Power: 2.0HP

Max speed(3 people): 22km/h

Max rotate speed: 7500rpm

Idle speed: 3000rpm

Displacement: 42.5cc

Fuel tank volume: 1.0L

Grease volume: 80ml

Overall size(when tiller arm folded): 105 x 22 x 26cm

Length of tiller arm: 55cm

Propeller diameter: 180mm

Shaft length: 40cm (see photo below)

G.W: 10.5kg

Approx. 30,000 / Unit Get Latest Price

Features:
360 degree steering rotation for reverse without gear shifting
Start-In-Gear protection/clutch feature prohibits prop rotation while idling
Lift/Tilt feature for shallow water operation and convenience
Superior engine water cooling system for improved engine performance
Easy pull off engine cover with push button latch for instant motor access
Standard CDI ignition system for easy starting and improved performance
Vertical mount engine design for increased power, performance and durability
Superior carbonation system with primer bulb
Twist grip throttle handle and engine stop button for improved response
Superior outboard anti corrosion system and anodes for increased durability
Durable cast aluminum construction
Through the prop exhaust outlet for decreased noise and pollutants
Heavy duty lightweight aluminum cast propeller.

Approx. 32,500 / Piece Get Latest Price

• Four boston valves on main hull chamber for quick-fill, fast-deflate
• Super-Tough construction is triple strong and is made with 3 separate layers of material for extra strength and durabilty-two outer layers of heavy-gauge PVC laminated to an in layer of polyester mesh for extra reinforcement
• Inflatable kel for improved control and handling.

Approx. 58,000 / Piece Get Latest Price

Engine Features:1. Easy to operate and high safty2.Precise Machining Technique3. Long Life of the Machine4.Delicate and Beautiful Appearance Design5. Broader Applicable Scope6.Good quality and less malfunctionProduct category : Premium model (standard)Product sub-category : For engine 7-13 HP (Honda GX340, GX390)Complete set : engine base, base seize, engine housing, PTO shaft 25.4 mm., handle, long shaft A100 inch and propeller 7.5 inch.Short description : A premium set MAC II is designed to support any purpose of use.They consist of- Engine base Standard engine base strong, durable to carry a heavy engine- Base seize Standard base seize durable to hold with any surface on the boat- Engine housing Long standard engine housing that can carry with any power of engine.- PTO shaft Long standard PTO shaft 25.4mm 10 points. can deal with high power of engine.- Handle A standard handle 0.85m simple, comfortable and easy to control.- Long shaft Long shaft 100 inch, the length suits with this range of engine.- Propeller Aluminum propeller 7.5, the proper size of propeller made a boat go faster.

Approx. 25,000 / Unit Get Latest Price

Using a Honda GX35 Engine, this outboard it ideal for a canoe or kayak. The 35cc engine and leg  weigh less than 25lbs
Light weight makes it ideal for a 10 foot Jon Boat.Ideal for a backup engine on a larger boat.Weights much less than any trolling motor and battery and has a much greater range than a battery.Centrifugal clutch allows engine to idle without prop rotation.

• Adjustable height fits any transom.
•  Honda GX35 T3
• Mini 4-stroke OHC Vertical Engine
• 35cc
• 1.3 Net HP
• 4 stroke engine
• Aluminum prop
• Kill switch on handle
• Air cooled engine - no water pump.
• Fully assembled and ready to operate.

About the Honda engine

 

• 4-stroke - no fuel/oil mixing
• Full 360° "any-side-up" operation - use and store in any position
• Exclusive rotary-slinger lubrication system
• The world's lightest OHC engine
• Approximately half the operating cost of comparable 2-stroke enginesEfficient port configuration and large diameter valves maximize power output
• Lighter, more rigid valve train
• Carburetor equipped with accelerator pump for fast, easy acceleration
• Precision engineered components result in lower vibration
• Lighter piston minimizes vibration
• Ball bearing supported crankshaft for greater stability
• Roller bearing supported connecting rod
• High quality materials, fit, and finish
• Lifetime timing belt design
• Integrated fuel system protection
• Diaphragm carburetor
• Easily accessible spark plug
• Easy to drain and re-fill oil
• No mixing of gas and oil
• Exhaust decompression system
• Unique low inertia design
• CARB and EPA certified
• No catalyst necessary
• Special designs for horizontal and vertical applications available
• Large capacity, multi-chamber exhaust system
• Sophisticated air intake system

 

Approx. 56,000 / Piece Get Latest Price

uman engineering delivers user-friendly operation
an outboard designed with user-friendly features, is an outboard that lets you enjoy more of your time on the water. That's why the df2. 5 is equipped with a twist-grip throttle for easier operation from different sitting positions, and full-turn 360° teering, which is advantageous when maneuvering in tight places and also delivers superior thrust when backing.
operation is quiet and smooth, and the engine is water-cooled for increased durability and dependability. And a large capacity integrated fuel tank holds one-liter of fuel, which provides an estimated operating time of almost an hour on a full tank.
other features include steering and throttle tension adjustor systems, f-n shifting located on the starboard side just where you'd expect, and an oil level indicator conveniently located on the port side for easy oil checks.
more convenient features
removed from the boat, the df2. 5 is balanced, lightweight, and easy to manage due to its large carrying handle. The integrated handle is located on the back of the engine cowling where it also assists when tilting the engine. And there's four-position tilting for matching the outboard with individual boat and operating conditions.
environmentally friendly, economical operation
suzuki's four-stroke technology squeezes more from every tank of fuel than a comparable two-stroke outboard. Four-stroke technology also delivers clean operation that allows the df2. 5 to gain carb 3-star certification for ultra low emissions by the california air resources board
modeldf2. 5recommended transom height mms:381, l:508starting systemmanualweight kg *1s:13. 5, l:14engine typeohvfuel delivery systemcarburetorno. Of cylinders1piston displacement cm368bore ×stroke mm48 x 38maximum output kw1. 8full throttle operating range rpm5,250-5,750steeringtillerchokemanualoil pan capacity lit. 0. 38fuel tank capacity lit. Integral 1. 0ignition systemdigital cdialternator-engine mountingbushing typetrim methodmanual trim and tiltgear ratio2. 15:1gear shiftf-nexhaustabove prop exhaustpropeller selection (pitch) *2
all propellers are the 3-blade type5. 3/8"
dry weight: not including propeller and engine oil
please inquire at your local dealer for details of the propeller
the appearance, colors, and equipment of outboard motors may differ according to market and grade.
specifications may change without prior notice.
*manufacture data
 

Approx. 24,000 / Piece Get Latest Price

Intex actually has a trolling motor under their brand.

It provides 40 lb of thrust, which is not much. But it does come with impressive features though:

• extending + tilting handle
• suitable for saltwater and freshwater
• built-in battery power meter
• has an auto-prop oscillation mode, which turns the prop left-right to shake off weeds caught on the propeller

I like the features, but would prefer more than 40 lb of thrust.

The truth is that I don’t have any experience with this motor though, you can read what customers think about it 

Approx. 89,100 / Piece Get Latest Price

PARSUN TWO STROKE 5.8HP OUTBOARD ENGINES FEATURES:

1. Compact and lightweight outboard engines, only 20kgs

2. Innovative CDI ignition system for easy starting engines

3. Twist grip throttle for easy maneuverability and safety

4. Safety lanyard/emergency shut off

5. Thermostat controlled water cooling system for consistent engine temperature

6. Heavy duty aluminum propeller

7. Convenient 2.7L integral fuel tank

8. Vibration reduction system

9. Start in gear protection

10. Ultra low emission

 11. Carrying handle

 

OPTIONS:
1. 12L or 24L separate fuel tank and hose for select

5.8hp outboard engines are simply the best value for quality portable outboard engines in its class. Durable, Reliable, Fuel efficient, Quiet and Superior performance. They also have the power and reliability to take you almost anywhere. And PARSUN knows that wherever you go you want to get there as economically as possible and with no worries or bother.

 

PARSUN 5.8HP OUTBOARD ENGINES SPECIFICATIONS 

*Propeller choice will vary by boat size and application.
*B=Back control(Tiller control), M=Manual start, X=Ultral long shaft, L=Long shaft  

Approx. 25,000 / Piece Get Latest Price

DESCRIPTION The OHC design is driven by a maintenance-free, low-noise timing belt, which makes the engine more compact and lightweight A special cast iron cylinder sleeve and a high carbon steel, dual ball-bearing crankshaft ensure a high durability and reliability The unique OHC layout combined with a large-capacity muffler reduces engine noise to low levels for better user-friendliness Meets world's most stringent environmental legislation A compact combustion chamber with high thermal efficiency ensures low fuel consumption Engine Bore X Stroke (mm) 46 x 48 mm Compression ratio 9 : 1 Description Code 4-stroke single cylinder, OHV petrol engine, 25?? inclined cylinder, Horizontal shaft Fuel Tank Capacity (L) 1.5 L Ignition System Transistor Type Magneto Ignition Net Power 1.5 kW ( 2 HP ) / 3600 rpm Oil Capacity 0.36 L Starting System Recoil (el. start optional) Dry Weight(Kg) 11.1 kg Displacement 79.7 cm3; Cylinder sleeve type Cast iron sleeve Dimensions (L x W x H) 275 x 342 x 323 mm Fuel cons. at cont. rated power 0.6 L/h - 3600 rpm Cont rated power 1.2 kW ( 1.6 HP ) / 3600 rpm Max. net torque 4.5 N.m / (0.46 kgf.m / 2500 rpm Complete set : engine base, base seize, engine housing, PTO shaft 19.05 mm., handle, long shaft A85 inch and propeller 6.25 inch. Short description : A premium set MAC I is designed to support any purpose of use. They consist of - Engine base   Standard engine base strong, durable to carry a heavy engine - Base seize   Standard base seize durable to hold with any surface on the boat - Engine housing   Long standard engine housing that can carry with any power of engine. - PTO shaft   Long standard PTO shaft 19.05mm. can deal with high power of engine. - Handle   A standard handle 0.85m simple, comfortable and easy to control. - Long shaft   Long shaft 85 inch, the length suits with this range of engine. - Propeller   Aluminum propeller 6.25 , suitable size of propeller made a boat go faster.

Approx. 5,500 / Piece Get Latest Price

Fit most of Intex motor mountable inflatable boats, 68351, 68347, 68349,68376 etc.  
Adjustable stainless steel brackets    
ABS plastic outboard  
Fits up to 3.5HP petrol or electric outboard motor 
Excluded: boat, motor   
Brand new

Approx. 800 / Piece Get Latest Price

• It has cool and stylish look with Comfortable and Perfect Fitting and Adjustable Straps.
• The Weight Capacity is from 70 Kg To Upto 80 Kg
• It has wide arm holes For Quick Open and adjustable straps for best fit and safety
• There are 3 quick release buckles for fast wear for security
• It is 100 % Genuine Product and High Quality Material. The Product May Vary From Picture and Colors Shipped are as per Availability

Approx. 40,000 / Piece Get Latest Price

Features:
 start-in-gear protection/clutch feature prohibits prop rotation while idling
 lift/tilt feature for shallow water operation and convenience
 transistor non-contact electronic ignition for easy starting and improved performance
 vertical mount engine design for increased power, performance and durability
 superior carbonation system with primer bulb for increased efficiency
 twist grip throttle handle and engine stop button for improved response
 superior outboard anti corrosion system and anodes for increased durability
 durable cast aluminum construction for superior corrosion protection
 heavy duty lightweight plastic cast propeller is standard equipment  
Specifications:
Model:vertical axis''''single cylinder, air cool, four stroke, hand pull
Max. Output: 6.0HPStroke: 4-stroke
Bore and stroke: 70x45mm
Displacement(ml): 173
Compression ratio: 7.8:1
Max power : 3.2KW/3600rpm
Max torque: 9N.m/2500rpm
Ignition system: transistor non-contact electronic ignition
Startup model: hand pull
Noise exhaust method: muffler out machine and emission directly
Outboard model: spline drivehard shaft, spiral bevel gear
Steering: vertical axis, counterclockwise
Installation method: fix racks or intensify bracket
Propeller configuration counterclockwise: three blade or two blade anti-windTrim and tilt system :manual tilt
Transmission system: centrifugal clutchLubrication method: splash
Lubricating oil: standard
hyperboloid gear oil
Reduction ratio: 22: 15
Built-in fuel tank volume:1.0LOil(engine oil) tank volume:0.6L
Packing dimension: 96 x 50 x 38cm
Weight: 29.0kg 
Pay attention not to test the motor on the ashore but in the water.
Item specifics Condition:New Brand:Stallion Steering:vertical axis, counterclockwise Manufacturer Part Number:Does Not Apply Installation method:fix racks or intensify bracket Engine(HP):6 HP Propeller configuration counterclockwise:three blade or two blade anti-wind Stroke:4 Stroke Trim and tilt system:manual tilt Bore and stroke:70x45mmTransmission system:centrifugal clutch Displacement(ml):173Lubrication method:splash Compression ratio:7.8:1Lubricating oil;standard hyperboloid gear oil Max power:3.2KW/3600rpmReduction ratio:22;15Max torque:9N.m/2500rpmBuilt-in fuel tank volume:1.0LIgnition system;transistor non-contact electronic ignition Oil(engine oil) tank volume:0.6LStartup model:hand pull Packing dimension:96 x 50 x 38cmNoise exhaust method:muffler out machine and emission directly Weight:29.0kgOutboard model:spline drivehard shaft,spiral bevel gear UPC:Does not apply

Approx. 58,000 / Piece Get Latest Price

The Thai's have been making long tail motors for over 60 years and are the International Standard for shallow water outboards.  Do you have shallow muddy water and/or weeds that you can't get through with an outboard or trolling motor?  If so, then our CLP kits are your solution.  These are the four wheel drive of outboards.
CLP is the leading manufacturer of Thailand Long Tails.  CLP is an engineering company that has perfected the design of the Long Tail.  Their design is the most efficient on the market.   They use high grade, polymer and metal alloy bushings unlike the competition which uses WOOD BUSHINGS.  The shaft is mounted to the engine with a perfect, direct fit through the use of an adapter that has splines.   The result of these features creates less vibration or power loss.  The power is transferred to the prop in the most direct and efficient way.